Custom industrial railing for pedestrian walkways
Whether it's ADA or IBC, our pedestrian railing is designed to meet all applicable code requirements.
Our modular railing system is easily customized to fit every slope and turn of your pedestrian walkway.
With a few simple tools and no welding, you can have your new walkway railing installed in a few hours!
Made from hot-dipped galvanized steel, our pedestrian walkway railings are designed to last a lifetime.
Whether it's a park trail, sidewalk, or pedestrian bridge, walkway railings are intended to keep people safe and on the path. A corroded railing or lack of a railing is unsafe, especially near waterways or a steep slope.
The steel Kee Klamp fittings are designed for longevity and strength with hot-dipped galvanization to ensure each connection point remains solid.
Whatever weather, season, or location, our pedestrian walkway railing will keep your people safe for decades.
Speak to a Project SpecialistGet started on your railing project today!
Whether you need a pedestrian railing for paths along canals, bridges, piers, or overpasses, Kee Klamp railing can be customized to your project.
Do you need infill panels? Have a curve in an odd place? No problem. Every railing project is unique and our railing is up for the challenge.
Skip the welding and costly installation, and save time and money with a modular railing system.
Our pedestrain railing systems assemble easily with a series of set screws. Mounting your new pedestrian railing is accomplished simply by installing a few anchors in the base of your railing.
The below walkway railing requirements combine OSHA, ADA, and IBC requirements as they are generally the same.
Required guards shall be not less than 42 inches (1067 mm) high, measured vertically as follows:
Required guards shall not have openings that allow passage of a sphere 4 inches (102 mm) in diameter from the walking surface to the required guard height.
Handrails and guards shall designed to resist a linear load of 50 pounds per linear foot (plf) (0.73 kN/m).
Handrails and guards shall be designed to resist a concentrated load of 200 pounds (0.89 kN).
It is important to check with your local municipality code for exact requirements in your area.Option available in footer.
