- Hot Dip Galvanized to BS EN ISO 1461
- Manufactured from Ductile Iron to BS EN 1563
- 5 to 1 Factor of Safety
- Independently tested
Product Description
The BB Long Nose is very similar to our standard type BB but with an extended nose. This distributes more contact on the flanges of parallel beams providing, contact closer to the web. Packing pieces BH1, BF1 and BG1 can be used with this product to make it fit to various thickness's of steel at 90 degrees, see page 17 for details.
The Safe Working Loads are based on assemblies tested in typical conditions.
| Model | Bolt Grade | A Bolt Dia. | B | C | D | E | Width | Width Torque (ft lb) |
Tensile SWL (lbs) (per bolt) |
Friction SWL (lbs) (per 4 bolts) |
|---|---|---|---|---|---|---|---|---|---|---|
| BB1LNG12 | Grd 5 | 1/2 | 9/16 | 1-13/16 | 11/16 | 1/4 | 1-1/8 | 51 | 1292 | 287 |
Do not exceed the Safe Working Load (SWL) specified.
Additional Information
| Model | BB1LNG12 |
|---|---|
| Manufacturer Model Number | BBLNG12 |
| Manufacturer | Kee Safety |
| Brand | Beam Clamp |
| Material | High Strength Ductile Iron |
| Finish | Hot Dip Galvanized |
| Bolt Diameter | 1/2" |
