DIY Freestanding Pull Up Station and Workout Structure
A customer built this pull up and workout station using Kee Klamp pipe fittings and pipe. The entire structure is 10' tall and the width is 5' on all sides. The side bars can be adjusted up and down through loosening and tightening the set screws in the pipe fittings. Here's what Pete had to say about his project:
I recently built a three station pull up bar with a 10' horizontal cross bar for rope ascents. It's rock solid and was made possible by Kee Klamp Fittings!
Pete was obviously psyched about what he was able to do with the fittings. Here is a quick run down on the materials:
Parts you'll need
The 45-86 parts are for the pull up cross bars.The 86 represents the size of the pipe that is different for the upright vs. the cross bar. The uprights are 1-1/2" for strength and weight and the cross bars are 1", making them easier to grip.
In order to keep the cost of the pipe and shipping down to a minimum, Pete obtained his pipe through a local home store. The fittings for this project cost about $230.00.
If you want to use Kee Klamp fittings to build a custom piece of gym equipment talk to our projects team. We can assist you with your design.