Product Description
The 30 to 45 Degree Three Socket Tee is used in railing applications to connect a vertical upright with a sloped top rail between a 30 and 45 degree angle. This fitting can connect one vertical upright and either one or two top rails depending on what you need as there are two set screws within the socket for the top rails to be secured.
Find more uses for Kee Klamp fittings by browsing our projects area.
Kee Klamp pipe fittings are designed to connect and secure pipe structures by using a set screw system. Kee Klamp fittings are made from a mild steel that is cast and then galvanized making them corrosion resistant. The set screws are coated in a proprietary “Kee Koat” to make them corrosion resistant as well.
All fittings are tested to meet our quality assurance standards through every step. All set screws are secured using a Hex Key, and all fitting sizes are based on Schedule 40 pipe sizing.
Reviews
Technical Data
Imagery
| Model | Measurements (in.) | Weight (lbs.) | ||
|---|---|---|---|---|
| A | D | E | ||
| 427-7 | 7.00 | 7.09 | 2.17 | 2.09 |
| 427-8 | 8.00 | 8.50 | 2.36 | 2.69 |
| Model | Measurements (mm) | Weight (kgs) | ||
|---|---|---|---|---|
| A | D | E | ||
| 427-7 | 32.00 | 180.00 | 55.00 | 0.95 |
| 427-8 | 40.00 | 216.00 | 60.00 | 1.22 |
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
Additional Information
| Model | 427 |
|---|---|
| Weight (lbs) | 0.08 |
| Manufacturer | Kee Safety |
| Brand | Kee Klamp |
| Material | Galvanized Steel |
| Size / Fits Pipe: | 7 / Outside Diameter 1.660", 8 / Outside Diameter 1.900" |
| Fits Pipe OD | 1.660", 1.900" |
| Fits Pipe (Nominal Bore) | 1-1/4", 1-1/2" |
| Loads | A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1) |
| Set Screw | Case hardened steel, Kee Koat corrosion resistant coating |
