Product Description
The 11 to 30 Degree Single Socket Tee is an adjustable fitting designed to give you an angle between 11 and 30 degrees. This fitting is commonly used for bracing and struts along with being used for terminating the mid-rail on sloping guardrails in the end upright. You’ll have your upright through the straight end of the fitting and have your mid-rail connect into the angled opening of the fittings.
Find more uses for Kee Klamp fittings by browsing our projects area.
Kee Klamp pipe fittings are designed to connect and secure pipe structures by using a set screw system. Kee Klamp fittings are made from a mild steel that is cast and then galvanized making them corrosion resistant. The set screws are coated in a proprietary “Kee Koat” to make them corrosion resistant as well.
All fittings are tested to meet our quality assurance standards through every step. All set screws are secured using a Hex Key, and all fitting sizes are based on Schedule 40 pipe sizing.
Reviews
Technical Data
Imagery
| Model | Measurements (in.) | Weight (lbs.) | ||
|---|---|---|---|---|
| A | D | E | ||
| 329-7 | 7.00 | 3.90 | 2.13 | 1.61 |
| 329-8 | 8.00 | 4.29 | 2.32 | 1.90 |
| Model | Measurements (mm) | Weight (kgs) | ||
|---|---|---|---|---|
| A | D | E | ||
| 329-7 | 32.00 | 99.00 | 54.00 | 0.73 |
| 329-8 | ||||
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
Additional Information
| Model | 329 |
|---|---|
| Weight (lbs) | 0.08 |
| Manufacturer | Kee Safety |
| Brand | Kee Klamp |
| Material | Galvanized Steel |
| Size / Fits Pipe: | 7 / Outside Diameter 1.660", 8 / Outside Diameter 1.900" |
| Fits Pipe OD | 1.660", 1.900" |
| Fits Pipe (Nominal Bore) | 1-1/4", 1-1/2" |
| Loads | A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1) |
| Set Screw | Case hardened steel, Kee Koat corrosion resistant coating |
