Product Description
The Sloping Cross fitting is designed for the mid rail of a guardrail or handrail to go down slopes or staircases at a 30 to 45 degree angle. This fitting connects on vertical upright all the way through it, with a flat horizontal mid rail to a sloping upward mid rail.
Find more uses for Kee Klamp fittings by browsing our projects area.
Kee Klamp pipe fittings are designed to connect and secure pipe structures by using a set screw system. Kee Klamp fittings are made from a mild steel that is cast and then galvanized making them corrosion resistant. The set screws are coated in a proprietary “Kee Koat” to make them corrosion resistant as well.
All fittings are tested to meet our quality assurance standards through every step. All set screws are secured using a Hex Key, and all fitting sizes are based on Schedule 40 pipe sizing.
Reviews
Technical Data
Imagery
| Model | Measurements (in.) | Weight (lbs.) | ||||
|---|---|---|---|---|---|---|
| A | D | E | F | G | ||
| 326-7 | 7.00 | 5.59 | 2.36 | 3.50 | 2.36 | 2.25 |
| 326-8 | 8.00 | 6.06 | 2.68 | 3.94 | 2.68 | 2.47 |
| Model | Measurements (mm) | Weight (kgs) | ||||
|---|---|---|---|---|---|---|
| A | D | E | F | G | ||
| 326-7 | 32.00 | 142.00 | 68.00 | 89.00 | 60.00 | 0.82 |
| 326-8 | 40.00 | 154.00 | 74.00 | 100.00 | 68.00 | 0.95 |
Pipe Size Chart
The chart below will help you understand how to match the size of fittings and pipe.
Additional Information
| Model | 326 |
|---|---|
| Weight (lbs) | 0.08 |
| Manufacturer | Kee Safety |
| Brand | Kee Klamp |
| Material | Galvanized Steel |
| Size / Fits Pipe: | 7 / Outside Diameter 1.660", 8 / Outside Diameter 1.900" |
| Fits Pipe OD | 1.660", 1.900" |
| Fits Pipe (Nominal Bore) | 1-1/4", 1-1/2" |
| Loads | A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1) |
| Set Screw | Case hardened steel, Kee Koat corrosion resistant coating |
