- Description
-
Product Description
One Continuous Design
It's in the name! This railing kit offers a unique adjustable elbow connection that allows the handrail to have no open ends and terminate directly into the post. This eliminates any risk of snagging something on the railing
Fits Most Average Sets Of Stairs
Customizable to most standard stairs with a slope between 25 and 60 degrees. The grabrail is in line with the posts, so it'll work even on narrow staircases. Even if you don't know the stair angle are afraid your stairs will be too narrow, we still have a rail for you. Give us a call, and we'll walk you through the process.
Not Cold To The Touch
Bare galvanized steel can feel quite cold, especially on chilly days. An appropriate colored handrail will help lessen the initial shock of a freezing handrail or a hot one, for that matter.
A black handrail will feel warm in cold climates. A light-colored railing will not absorb as much heat in full sun locations.
Perfect For Outdoor Use
Your handrails will withstand even the harshest weather conditions, with no signs of corrosion. Our kits use industrial strength galvanized steel tubes and hot-dipped Kee Access fittings. The polyester powder coating not only adds a great look to your rail but also withstands scratches and scuffs.
You'll have a sturdy surface to grab onto any time you go outside, take the trash to the curb, or relax on your deck.
Strong and Sturdy To Last Decades
These handrails are not flimsy handrails that you'll need to replace anytime soon. Once installed, you can rest assured that it will be there for you whenever you need it. Made from industrial strength tubes and fittings. Your handrail will last decades without rusting or bending.
Not The Handrail You Are Looking For?
Let our team help you design a rail that suits your requirements! We use galvanized steel or aluminum uprights to build sturdy rails that will help you gain access to your home or garden. Just get in touch with our team!
Downloads & Documents
Kit InstructionsPDF - Frequently Asked Questions
-
Frequently Asked Questions
What tools do I need?
You will receive an allen key with your railing kit that can be used to connect the pipe and fittings. We recommend using a hammer or rubber mallet to secure the malleable plug to the ends of the handrail and a standard drill or a hammer drill if you will be attaching your railing to concrete or brick.How do I calculate my handrail length?
This simple way to do this is to have someone stand at the bottom of the steps holding the end of the measuring tape. Walk to the top of the stairs while each of you hold the measuring tape 3 feet off the ground. Record the length when you have positioned the ends where you want the railing to begin and end. In most cases, estimating to the nearest foot works great. Tip: Longer is better. Your handrail can be cut shorter if needed before install. The mathematical way of calculating would be to measure the rise and run of the steps and then calculate the length of the railing by the following formula: Railing Length = √ height2 + length2. The square root of the height squared plus the length squared will give you the proper length of your railing.How do I assemble the railing?
This couldn't be easier. You'll receive a basic set of instructions with the railing kit or you can download them now by clicking on the download link at the bottom of this page.Can I paint the railing?
You sure can! All of our kits can be painted. Many of our customers have used spray paint to add a splash of color to their railing. Depending on the frequency of use and weather, the paint may need to be touched up on occasion.Can I cut the tubing myself on an abrasive-wheel chop saw?
Yes, you can. Simply make sure you have the correct blade for cutting galvanized metal.Can these be mounted to wooden stairways?
Yes, they can. Our railing kits come with mounting hardware for both wood and concrete included. You should have no problem mounting this railing to wood.Do these rails or any of the parts rust?
Our railings are comprised of galvanized cast-iron fittings and triple-galvanized steel rails. They are designed to withstand the elements and, in most cases, will not show rust for decades to come.How many posts do I need?
We recommend no more than a 7 foot spacing between posts. All kits up to 7 feet will come with 2 posts. Kits longer than 7 feet will come with 3 posts. - Details
-
Additional Information
Model sr-cla-limited-hybrid-continuous Manufacturer Simplified Building Concepts Brand Simple Rail Installation Difficulty Easiest - No pipe cutting or pipe drilling required. Railing Type Slip-On - Fittings wrap around grab rail. Railing Ending Wall / Post Mounting Angle Standard Stair Angles (30-60 degrees) Pipe Drilling Required? No Pipe Cutting Required? No Mounting Style Base & Wall Flange Garage Mounting Location Wall Finish Galvanized Metal Galvanized Steel Height 36"
