Wall Mounted Clothing Rack - Single Tier Extension

Store More with Warehouse Clothing Racks

Strong Enough for Any Application

Made from structural tubing and our Kee Klamp fittings, our warehouse clothing rack kits are built to handle the heaviest of garments. Storing bulk clothing for dry cleaners, large retail stores, or heavier fabrics is made simple with the use of these kits.

All kits include angled bracing to make the system more robust. No more worrying if the clothing rack will bend under the weight of your inventory.

Access your clothing inventory safely with the strength built into our kits.

Expands to Fill Any Warehouse Space

Specifically designed to be added to, you can quickly fill out any storage space with just two types of clothing rack kits. We offer a base rack kit along with its associated extension kit. These are designed for outfitting wall space as well as floor space.

Our base rack kits can be partially disassembled and expanded by 6 feet at a time by incorporating an extension kit. If you need more hanging space, just add another extension. It’s that easy.

By using our clothing rack kits you can get every square inch of usability out of your storage space.

Simple Enough for Any Installer

Set up your back-end storage room quickly with our easy-to-install clothing rack kits. Our kits are designed with the end user in mind. No complicated instructions or hundreds of tiny pieces to sift through. Just slide the fittings on the pipe and tighten where desired.

Each kit has only a handful of fittings and all pre-cut lengths of tubing to ease the confusion of installation. Do it yourself or bring in someone you know who is handy.

Give your storage room an upgrade quickly with our simple-to-install kits.

Let's Start Building

Customer Clothing Rack Projects

Heavy-Duty Clothing Rack Kits

How Much Weight Can Industrial Clothing Racks Hold?

This is likely a question you would like answered as you plan to upgrade your storage and display capabilities with our industrial clothing racks. Let’s break it down. Our heavy-duty clothing rack kits are all made using size 6 gator tubing (12 gauge 1” N.B.) and size 6 fittings. The spans refer to the distance between two vertical uprights.

• 2’ Span: 689 lbs.
• 3’ Span: 459 lbs.
• 4’ Span: 344 lbs.
• 5’ Span: 275 lbs.
• 6’ Span: 229 lbs.
• 7’ Span: 196 lbs.
• 8’ Span: 172 lbs.
• 9’ Span: 153 lbs.
• 10’ Span: 138 lbs.

Important Note: Our kits will not span more than 6-feet. If you want a larger clothing rack than what our kits offer, please connect with a project specialist to go over your clothing rack designs.

If you want a more detailed look at different sizing and spacing, check out our pipe guide to learn more about weight loads and spacing.