Product Description
The GrateFix grating fastener is a simple method of securely fastening steel, aluminum and fiberglass grating to support steelwork. Using only an Allen Key to install, grating can be secured without welding or drilling.
The GrateFix is designed to be installed from above the grating by one person. No access below the grating is required resulting in a quick and simple installation. The GrateFix consists of a stepped malleable iron bottom casting complete with screw and saddle clip bracket.
Tested for vibration conditions at TÜV
These grating fasteners are available galvanized or in grades 304 and 316 stainless steel.
Model | Material | Screw Diameter |
Flange Thinkness,T | Grating Bar Depth | Grating Bar Width | Grating Bar Spacing |
Tightening Torque (ft lb) |
|
---|---|---|---|---|---|---|---|---|
Min | Max | |||||||
GF3S08 | 304 Stainless Steel | 5/16 | 1/8 - 3/4 | 7/8 | 1-1/2 | 5/16 - 3/8 | 1-3/16 | 4 |
GF1S08 | 316 Stainless Steel | 5/16 | 1/8 - 3/4 | 7/8 | 1-1/2 | 5/16 - 3/8 | 1-3/16 | 4 |
GF1G10 | Galvanized Malleable Iron | 3/8 | 1/8 - 3/4 | 3/4 | *2 minus T | 1/8 - 1/4 | 1-3/16 | 8 |
GF1G10-75 | Galvanized Malleable Iron | 3/8 | 1/8 - 3/4 | 1-5/8 | *2-5/8 minus T | 1/8 - 1/4 | 1-3/16 | 8 |
GF1G10-90 | Galvanized Malleable Iron | 3/8 | 1/8 - 3/4 | 2-1/8 | *3-1/8 minus T | 1/8 - 1/4 | 1-3/16 | 8 |
GF1G10-100 | Galvanized Malleable Iron | 3/8 | 1/8 - 3/4 | 2-5/8 | *3-5/8 minus T | 1/8 - 1/4 | 1-3/16 | 8 |
GF1G10-110 | Galvanized Malleable Iron | 3/8 | 1/8 - 3/4 | 3-1/8 | *4-1/4 minus T | 1/8 - 1/4 | 1-3/16 | 8 |
* Grating Bar Depth is variable dependent on thickness of the flange.
Additional Information
Model | GFXSXX |
---|---|
Manufacturer | Kee Safety |
For Use With | Clamp for Steel, Aluminum & Fiberglass Grating |