A Simple To Install, Cost Effective Method
For Securing Steel Flooring
Secure Steel Floor Plate to Existing Steel
The FloorFix fastener is designed for positioning raised pattern floor plates without the need for welding or drilling of the supporting steelwork. With simple hand tools, it can be installed by one person working from above and eliminates the need for access to the underside of the floor plate. The Floor- Fix can be secured quickly and likewise removed or repositioned with ease. The FloorFix is supplied with a galvanized finish.
The FloorFix HT fastener is designed primarily to secure raised pattern floor plates to supporting steelwork from the top side only, with no need for drilling, tapping, bolting or welding. Working on a cam mechanism, it can be installed by one person working from above using a basic hexagon key drive. The fastener allows for a high degree of tolerance when installing steel flooring, up to +/- 0.25" of its intended position. The fastener is supplied with a galvanized finish.
Made to suit plates ranging from 1/8" to 1/2" thick and steelwork flanges up to 5/8" thick. For thicker flanges, spacers can be provided.
|product code||screw diameter (in.)||floor plate thickness (in.)||steelwork flange thickness (in.)||tightening
torque (ft lb.)
Place the FloorFix or FloorFix HT on the underside of the floor plate. Loosely tighten the bolt, making sure the flat edge of the casting is inline with the edge of the steelwork.
Lower the plate into position over the supporting steelwork.
Once the floor plate is in the desired position rotate the countersunk screw one full turn counterclockwise.
Tighten the countersunk screw until the plate is secured, for guaranteed performance tighten to recommended torque.