- Hot Dip Galvanized to BS EN ISO 1461
- Manufactured from Ductile Iron to BS EN 1563
- 5 to 1 Factor of Safety
- Lloyds Register approved
- DIBt approved
Product Description
Type BB clamps are commonly used in pairs to clamp two steel sections together. The type BA has a recessed top to grip the head of a grade 5 setscrew or bolt. This allows a nut and washer to be tightened down on to the flat top of the BB using one tool only. Both clamps are available with three tail lengths, 1, 2 or 3 (dim E). This should be as near to the thickness of steel it is clamping on or slightly less if an exact match is not possible. Packing pieces BF1, BG1 and BH1 can be used in combination with the tail length to achieve a match to the steel flange. BB type clamps are suitable for parallel flanges and flanges up to 8 degrees taper. They can also be used on their own if one piece of the steelwork has been pre-drilled. To simplify the selection of tail lengths and packing pieces, please see the tables below.
Product Video
The Safe Working Loads are based on assemblies tested in typical conditions.
Model | A Bolt Diameter | B | C | D1 | D2 | E | Width | Torque (ft lb) |
Tensile SWL (lbs) (per bolt) | Friction SWL (lbs) (per 4 bolts) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 2 | 3 | ||||||||||
BB G08 | 5/16 | 3/8 | 5/8 | 3/16 | 3/8 | X | 1/8 | X | 13/16 | 4 | 281 | X |
BB G10 | 3/8 | 1/2 | 13/16 | 1/4 | 7/16 | 1/8 | 3/16 | 5/16 | 1 | 14 | 562 | X |
BB G12 | 1/2 | 5/8 | 1 | 5/16 | 1/2 | 3/16 | 1/4 | 3/8 | 1-1/8 | 51 | 1293 | 292 |
BB G16 | 5/8 | 11/16 | 1-1/4 | 3/8 | 11/16 | 1/4 | 5/16 | 7/16 | 1-7/16 | 109 | 2219 | 877 |
BB G20 | 3/4 | 13/16 | 1-3/8 | 7/16 | 13/16 | 5/16 | ./8 | 1/2 | 1-3/4 | 210 | 3703 | 2473 |
BB G24 | 1 | 1 | 1-15/16 | 1/2 | 1 | 3/8 | 1/2 | 5/8 | 2-1/8 | 355 | 4743 | 4047 |
Add 1, 2 or 3 to the product code to indicate the desired tail length. For example, a 5/8” bolt diameter with a 5/16” tail would be product code BB2G16.
Do not exceed the Safe Working Load (SWL) specified
Additional Information
Model | BB |
---|---|
Manufacturer | Kee Safety |
Brand | Beam Clamp |
Material | High Strength Ductile Iron |
Finish | Hot Dip Galvanized |
For Use With | Flanges |