USA us flag
Chat agent onlineChat agent offline

Live Chat is open and ready.

Click on the chat now button to initiate a chat session with one of our customer service associates.

Close

Live Chat Now!

Live Chat is currently unavailable.

Please click on the contact tab to the right and we will get back to you as soon as we can.

Close

Our offices will be closed for the Thanksgiving holiday.
We will re-open Monday, December 1st at 9am EST.

Close

Phone

(888) 527-2278
(585) 672-7312

Fax

(585) 486-1136

Hours

9 AM - 5 PM EST

Email

info@simplifiedbuilding.com

Address

PO Box 24291
Rochester, NY 14619

You're currently on:

15 - 90° Elbow

The Type 15 Elbow fitting joins two pipes together at a 90 degree angle.

Elbows are commonly used in railing to terminate the end posts and to navigate corners. Elbows are commonly used around the outside of a structure and have hundreds of uses.

Find more uses for Kee Klamp fittings by browsing our projects area.

Typically ships in 1 business day(s).

Technical Data

Imagery

15-4 [tech]
15-4 [tech]
Model Measurements (in.) Weight (lbs.)
AD
15-40.841.330.29
15-51.051.610.60
15-61.321.810.86
15-71.662.361.48
15-81.902.671.70
15-92.383.342.82
Model Measurements (mm) Weight (kgs)
AD
15-415.0034.000.13
15-520.0041.000.27
15-625.0046.000.37
15-732.0060.000.67
15-840.0068.000.77
15-950.0085.001.28

References A, B, C refer to the Outer Diameter of the pipe that fits inside the fitting.

Pipe Size Chart

The chart below will help you understand how to match the size of fittings and pipe.

Pipe Fittings Size Chart

Model 15
Weight (lbs) 0.31
Manufacturer Kee Safety
Brand Kee Klamp
Material Galvanized Steel
Fits Pipe Size 4 (0.840" O.D.), 5 (1.050" O.D.), 6 (1.315" O.D.), 7 (1.660" O.D.), 8 (1.900" O.D.), 9 (2.375" O.D.)
Fits Pipe OD 0.840", 1.050", 1.315", 1.660", 1.900", 2.375"
Fits Pipe (Nominal Bore) 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"
Function Elbow, Railing
Loads A Kee Klamp component (size 5 to 9) can support an axial load of 2000 lbs. per set screw with the set screw tightened to a torque of 29 lbs/ft. (rating includes a safety factor of 2:1)
Set Screw Case hardened steel, Kee Koat corrosion resistant coating
Standards ASTM A47-77-32510, BS EN ISO 1461
 

Frequently Asked Questions

Does the fitting come with set screws?

Yes, Kee Klamp, Kee Lite and Kee Access fitting comes with the required set screws. If you would like extra set screws they are available for purchase. Stainless set screws are also available for additional corrosion protection.

Are these fitting available in colors?

Yes. Kee Klamp, Kee Lite, Kee Access fittings and pipe can be powdercoated to give them a durable baked on paint finish. Powdercoating is extremely durable and will give your railing or structure a really sharp look.

Please contact us if you have any questions about powdercoating.

What kind of pipe can be used with Kee Klamp and Kee Lite fittings?

Kee Klamp and Kee Lite components are designed to be used with Schedule 40 Pipe (or Schedule 80), but can also be used with other types of pipe or tube.

When aquiring your own pipe and tube it is important to know the actual OUTER DIAMETER of your pipe/tube . Do not assume that just because it says 1 Inch Pipe/Tube for instance, that the outer diameter is actually 1 inch. This mistake frequently results in returns.

If you are purchasing fittings and pipe from our website, match the pipe size with the fitting size such as Size 7 pipe with Size 7 fittings, Size 8 pipe with Size 8 fittings, etc. You may also refer to our SIZING CHART for further help.

How can I be sure I'm ordering the right size fittings?

If you already have pipe, please measure the outer diameter of your pipe and compare it to the chart on this page. For simplicity we have a printable pipe chart that you can use to measure your pipe. Be sure to follow the instructions on the sheet to guarantee an accurate measurement.

If you are purchasing your pipe from us, then be sure to match the size after the dash "-" on the fittings to the size of the pipe. For instance, a 10-7 is a size 7 fitting. Select size 7 pipe to go with that fitting.

Watch this Short Video for more about Pipe and Fitting Size

Do you have another question? Ask Away!

 

Other Products You May Be Interested In

 
Volume Discounts Available - Click Here for Info
MSRP Your Price Model Fits Pipe Qty
$12.25
$10.63
15-4 OD: 0.840"
NB: 1/2"
$11.86
$10.29
15-5 OD: 1.050"
NB: 3/4"
$12.52
$10.86
15-6 OD: 1.315"
NB: 1"
$16.52
$14.27
15-7 OD: 1.660"
NB: 1-1/4"
$20.93
$18.97
15-8 OD: 1.900"
NB: 1-1/2"
$32.28
$27.88
15-9 OD: 2.375"
NB: 2"

Volume Discounts Available

If you order more Kee Klamp brand parts, you can get a deeper discount.

Kee Klamp Order Size Discount
$3,000 4%
$5,000 9%

Discount will be applied automatically in the shopping cart.

Please note that this discount applies only to Kee Klamp brand fittings and not to Kee Lite, pipe or any other component.