Simplified Building Concepts - Kee Klamp, Kee Lite, Connectors, Railings

Home Solutions Box Bolt BoxBolt Features

Box Bolt - Features of the Blind Bolt Expansion Anchor

What makes the Box Bolt different and why should you use it?

Fast Installation

To tighten down a BoxBolt, an installer must typically use 2 wrenches to install one bolt - one to hold the outer sleeve stationary, and one to turn the inner bolt.

A Faster Way with BoxSok

The BoxSok adds simplicity to the installation process. Attached to a regular socket wrench (air powered makes this a snap), it takes the place of both wrenches. The BoxSok has an outer piece that will hold the sleeve of the BoxBolt stationary, while an inner piece turns the bolt. This makes what would have been a 4 minute job (per bolt) into a 30 second job.

A "good" reason to buy an "expensive" socket

Let’s say that the average installer costs $30.00 per hour to have on site (this usually is a very low estimate)
With 2 wrenches, this installer will take approximately 4 min. per bolt to perform the installation, whereas it will take 30 seconds with the BoxSok.
Let’s also say that you are installing 1000 bolts
If you are saving 3 ½ minutes per bolt, this is equal to over 58 hours of labor.
Going back to the original amount that our installer is being paid, this equals $1,740.00 in savings.

Other BoxSok benefits consist of:

Less fatigue on the installer
You won’t hold up other aspects of a job while waiting for the bolts to be installed
You will be able to get off of the jobsite faster