KeeGuard^® Roof Top Railing System

Video 1 : Time Lapse Construction

Chris and Dan show how simple the construction of a KeeGuard Fall Protection system can be. In under 16 minutes they assemble an 8 foot by 8 foot section of railing.

Because so many pieces come preassembled, construction is quick and does not require any special knowledge or tools. Neither Chris or Dan had assembled a KeeGuard fall protection system before this video.

Video 2 : KeeGuard Fall Protection System Features

In this video we talk about some of the major features of the system. They include:

Non-penetrating - Counter balance system allows the system to sit on any flat roof without penetrating the roof membrane.

Galvanized Steel - This system is built to exceed OSHA standards. Its galvanized finish will also ensure that it will stand up to the elements and last for a very long time.

Modular - KeeGuard can be configured to protect your workers in a variety of circumstances. Sections can be long, short and also traverse multiple level roofs.

Video 3 : KeeGuard Fall Protection System Components

In this video Chris talks through the different components that make up the KeeGuard Fall Protection System

Counter Balances - Made with a protective coating on the bottom to protect the surface of the roof.

Upright Flange - Also make with a protective coating to protect the surface of the roof. This fitting can be angled to accommodate uprights that are vertically plumb or slightly off angle (to prevent them from being seen from the street.

Preassembled Uprights and D-Returns - The uprights and d-returns come preassembled making installation quick and efficient.