Shopping Cart
 
KeeGuard Contactor - Portable Railing System, Roof Edge Fall Protection

KeeGuard® Contractor Portable Railing System

A Safety Compliant Portable Solution for Roof Edge Fall Protection

Kee Guard Contractor - Typical Railing Setup, Portable, Easy to Install and Move

KeeGuard Contractor offers a new and innovative approach to portable railing systems. Since the system is free standing, there is no need for any hardware connections to the rooftop or working surface. KeeGuard Contractor meets all OSHA Standards for permanent railings, including OSHA Standard 29 CFR 1926.500.

KeeGuard Contractor - Easy to Assemble, Portable

Versatile, Easy to Assemble

The uprights are secured in the bases by set screws, making the system solid like a permanent railing and allowing variable angle changes of direction. Assembly is easy using a torque wrench or hex key to tighten set screws to 29 lbs/ft.

A railing section consists of 2 horizontal Schedule 40 galvanized pipes and 2 vertical Schedule 40 galvanized pipes for the 42 inch uprights. The modular system has 8 foot railing sections and 5 foot return sections with a galvanized finish ensuring a long and rust-free life of the system. Powder coating in Safety Yellow over a galvanized finish is available as an optional extra.

Stackable Base Plates - Makes the system stable and portable Base Plates Stack for Easy Storage

Each base plate has a strong galvanized finish and is supplied with a rubber pad on the underside to protect the roof membrane.

Each base plate is 20 inches in diameter and weighs 95 pounds. They are stackable which makes the system very easy to store. The base plates also have openings for an optional toeboard if needed. Ergonomically designed handles make handling of the bases easy, and final adjustment is a snap. Four upright anchor holes make almost any perimeter configuration possible.

Kart-A-Rail - Allows you to easily transport your KeeGuard Contractor rails and bases.

Portable

The Kart-a-Rail™ is used for easy transport of an entire KeeGuard Contractor System and can also be used for system storage. Balloon tires make movement of the unit easy. Large eyelets bolted to the frame allow easy attachment of belts or bungee cords to keep rails in place.

A Hand Cart is available to enable easy movement and to assist in placement of the base plates.

Design Assistance

If you need help configuring a setup or you would like to receive a quote for an entire KeeGuard Contractor system, please contact our Customer Service department.

Toll-free Call : 1.888.527.2278
Email: sales@simplifiedbuilding.com

 
Site Terms | Terms and Conditions of Sale | Privacy Policy
Blog | About Us | Contact Us
© 2008 Simplified Building Concepts, All Rights Reserved
Site Design By: http://web.simplifiedbuilding.com
Rapid SSL Cert
BBB Reliability Program