G-Clips - Bar Grate Fasteners and Mounting Device

Fastens Bar Grating to Structural Members

The G-Clip GG fastener is a galvanized, carbon steel grating fastener for securing steel grating to existing steel. Hand tools can be used for ease of installation. To install, simply drop the clip in place above the grating, slide the clip toward the beam flange, and tighten the G-Clip fastener using a 7/16" nut driver. Clips are also available in stainless steel for more corrosive environments.

Aluminum, stainless steel and custom sizes are available on a special order basis.

Tecnical Data

product code	bolt diameter (in)	grating thickness (in.)	tightening torque (ft lb.)
KSGG-1A	1/4	1	5
KSGG-1B	1/4	1 1/4	5
KSGG-1C	1/4	1 1/2	5

 

Mounts Devices onto Floor Grating

The G-Clip GM fastener is a galvanized steel fastener used to mount devices onto the grating surface. It serves as a method of attaching larger devices to existing grating. The G-Clip GM fastener consists of three parts; the stamped top, threaded stud, and the lower body assembly. The lower body assembly that holds in place a 1/2" nut, making installation hassle-free. Install using a spanner wrench or an adjustable open end wrench to tighten in place. This clip eliminates the need for J-bolts. The fastener can withstand 1,000 pounds of direct upward pull force with no distortions.

Lock washer and second threaded nut needed in installation not provided.

See this Product in Action

This clip can be used in conjunction with Kee Klamp fitting 262 to attach handrail bases to steel, aluminum or fiberglass grating.

See the complete example here Attach Handrail Uprights to Floor Grating

Tecnical Data

product code	stud diameter (in.)	stud length (in.)	body width (in.)
KSGM-12	1/2	3	7/8

 

Pricing / Ordering Information

Looking for a volume discount? Use our quote tab